Scosche Hd4600 Efx Amplifier (1200Wý 4-Channel)
Get Price
SPL Audio's new Phantom series amplifiers have stylish wedge-shape cases withChrome end-caps and a Cool Blue back-lit mesh logo plate. SPL's proprietaryMOSFET power supplies are standard equipment on these amps. Triangularcrystalline terminal blocks make for a smooth installation.Features:300 x 2 Watts RMS @ 4ohms380 x 2 Watts RMS @ 2ohms760 Watts RMS Bridged1500 Watts Max BridgedDimensions: 19" L x 2.3" H x 10.3" WFull Mosfet Power SupplyPWM CircuitryFull Selectable Crossover Hi/Full/LowThree Way Protection Circuit2 ohm Stable StereoTri-Mode CapableVariable Low Pass 40Hz-250HzVariable Hi Pass 40Hz-250HzVariable 18 dB Bass Boost @ 40HzFrequency Response: 10Hz to 30KHzS/N Ratio: 98 dBTHD: 0.02%System Distress Indicator4 Gauge Power/Ground ConnectionPlatinum Plated RCA ConnectorsLine OutputHigh/Low Level Inputs with Floating GroundRemote Bass Knob
Get Price
BRAND NEW SONY XPLOD XM-4S 500 WATT RMS SLIM 4/3 CHANNEL CAR AMPLIFIER WITH THE BEST SOUND QUALITY EVER FROM SONY!
Features:
500W 4, 3 channel amplifier
Slim series, perfect for trucks, cars, and more
4 Channels: 50W x 4 into 4 Ohms
3 Channels: 95W x 2 + 205 x 1 @ 4 Ohms
Perfect for pick-up trucks & compact vehicles
80Hz Low pass filter switch
80Hz High pass filter switch
Line & Speaker level inputs
40Hz EQ Boost
CEA-2006 Power Compliant
Max Power (Watts): 500W
Bridged into 4 ohms, THD%: 95W x 2 + 250 x 1
Signal to noise ratio (dB): 106dB
Frequency Response (Hz): 5 - 100kHz
Input Level Range (V) Line level input: 0.3 - 6
Current Drain at rated output (A): 25
Width (inch): 8-7/9
Height (inch): 1-5/7
Depth (inch): 7-5/7
Get Price
Tired of looking at the same old black boxes under your hatch? Audiobahn Class A/B MOSFET amplifiers are the hottest looking amps around. With the Cobalt blue illumination, high gloss chrome finish, and trademark flame fan covers, these amps are anything but subtle. Best of all, there's plenty of power packed in the internals to back up the hot look. The unregulated PWM (Pulse Width Modulated) power supply allows these amps to put out more power when the input voltage is higher - a perfect match to Audiobahn stiffening capacitors. Thanks to the built-in cooling fan and 3-way protection circuitry, stability is no problem. The Class A/B Series includes audiophile features such as variable 18dB/octave high pass (50 - 750Hz) and low pass (30 - 120Hz) crossovers and a defeatable 18dB bass boost at 45Hz. There's even built-in variable subsonic filter to protect your subwoofers during "intense crank it up" sessions.
Get Price
The Alpha series 4 channel stereo amplifier is equipped with the following features: Class “AB” circuitry, rated at 14.4 volts 4 x 300w – 4 ohms 2 x 1200w- bridged, 4 x 600w -2 ohms,QSINK heat management system, Buffered pre-amp input circuitry, Continuously Variable 12dB Low Pass X-over, Continuously Variable 12dB low pass X-over, Continuously Variable 12dB bass boost-45Hz, Continuously Variable Subsonic Filter (15-55Hz) (Mono Amps), Direct-connect integrated Speaker and Power wire Terminals, Full Range RCA Line Outputs for easy Daisy chain configuration, Variable Input Level Control, DC-DC PWM power supply, DC Short Circuit Protection, Bass Remote capability, Fuse type: Maxi 1 x 80 amp
Get Price
Reactor Amplifiers feature angled connections and terminals providing multiple installation options and allowing a cleaner installation finish. Mounting feet are incorporated into the end caps, creating clean lines and aesthetics. Three-way protection is also incorporated - providing safety from thermal, short circuit or output short - preventing your amplifier from overheating, incorrect connection or reverse polarity.Variable LPF (40Hz - 160Hz) ,Variable HPF (40Hz - 600Hz) Crossover selector switch for easy selection of filter Output RCA terminals for daisy chaining audio signal in multiple amplifier installations Plastic endcaps incorporating mounting feet for cleaner installation 45deg angled power terminals - accepts FUSION 4 gauge amplifier kit cable. Easy to install - not crimped terminals on cable 45deg terminals for speaker connection - accepts 8 gauge cable. Easy to install - no crimp terminals on cable required 3-Way protection – thermal, short circuit, output short Specifications -Bass Boost @ 45Hz>Channel Seperation 50dB Frequency Response 10Hz - 40kHz (-3dB) Fuse Rating 40A x 2 Input Impedance 20K Input Sensitvity 0.2V - 8V Max Power Rating 900 (Watts) 90 Watts RMS per Channel @ 4 Ohms: 125 Watts RMS per Channel @ 2 Ohms: 230 Watts RMS Bridged @ 4 Ohms Ratings per Channel> Signal to Noise 87dB THD @ Rated Power 1% (1kHz) Variable High Pass 6dB / Octave Filter Variable Low Pass Filter 6dB / Octave
Get Price
4 x 200 @ 4-Ohms 4 x 400 @ 2-Ohms 2 x 800 @ 4-Ohms MaxxThe new Ground Pounder GPV Amplifier series for 2009 has everything needed in a reliable performancedriven design from Crunch.Designed by our original Crunch engineers in celebration of 30 proud years the Ground Pounder Amplifier looks great is highlighted by a new heat sink attractive end panels a illuminated scrolling V light.V-Drive PerformanceWeve packed our latest V-Drive performance technologies inside the massive Ground Pounder heat sink. New military grade PCBs large 3 oz. copper traces were added to handle higher current loads. The SPI (Signal Path Isolation) provides clean audio signals to feed the enhanced performance power supply the upgraded circuitry that when combined makes up our new V-Drive technology. A/B Class 4 channel Amplifier Twin-Coil Isolation Design (TCID) Fully Adjustable Crossovers Include: 24 dB Low-Pass 24 dB Subsonic Filter Bass Thrust w/Variable Bass Equalization Crunch Logo w/Blue Halo Illumination Selector Switch Allows Choice of Fixed Illumination or Scrolling Illuminating V RCA Line Outputs Include: Amplifier Daisy-Chaining 4 to 0 Gauge Power Connectors 2-Ohm Stereo 4-Ohm Bridged Stable Twin-Turbo MOSFET Exponential Variable-Power Supply High-Current Power Supplies High-Speed MOSFET Outputs
Get Price
# Sedona Series 4-Channel Class A/B Car Amplifier
# RMS Power Rating:
* 4 ohms: 100 watts x 4 chan.
* 2 ohms: 145 watts x 4 chan.
* Bridged, 4 ohms: 290 watts x 2 chan.
# PWM MOSFET power supply
# Variable Bass Boost (0, 6, 12 dB at 50 Hz)
# IDI Intelligent Distress Indicator for thermal, short, and impedance protection
# Brushed aluminum finish
# Platinum 4 AWG power block
# Infinitely variable crossovers with multipliers (high/low/band)
# Turn on/off delay
# Tri Mode capable
# High and low inputs
# Variable high-pass filter (50-4000 Hz, 1/2 chan.)(15-500Hz, 3/4 chan.) @ 12 dB/octave
# Variable low-pass filter (50-4000 Hz, 12 dB/octave)
# Frequency response: 10-39,000 Hz
# Stereo separation: 47dB
# Signal-to-noise ratio: 100dB
# Damping factor: 163
# Total harmonic distortion: 0.03%
# Input sensitivity: 0.2V-6V
# Fuse: 30A x 2
# Dimensions: 15-3/4L x 9-1/2W x 2-1/3H
Get Price
Charles Darwin generated a lot of controversy with his theory of evolution. Although his theories were well respected in the scientific community, they met with opposition from some in the general public. Sound Storm Laboratories’ EVOLUTION is a series of stylish, efficient, high performing amplifiers that are as exciting and well respected as Darwin’s theory, but without all of the controversy. SSL EVOLUTION is loved by scientists and non-scientists alike. The high power output of the SSL EVOLUTION 4-channel amplifiers makes them a natural selection for those wanting a BIG sound. EVOLUTION amplifiers allow the user to power a combination of tweeters, full range speakers and subwoofers in order to tune their vehicle’s sound system to their exact preference specifications. The two ohm stable EV4.2800 provides 2,800 watts of peak power. This 4-channel MOSFET amplifier is bridgeable and also features tri-mode operation. It comes standard with a low pass crossover variable from 40Hz to 150Hz, a fixed (200Hz) high pass crossover, and Bass Boost variable from zero to +18dB. Additional features include a variable input gain control, power and protection (thermal, overload, and short circuit) LED indicators, and line and speaker level inputs. All EVOLUTION 4-channel MOSFET amplifiers include chrome plated RCA connectors and screw terminals and a remote subwoofer level control knob. Frequency response is 9Hz to 50Hz (+/-3dB). For technical questions about this product please visit our website, www.soundstormlab.com, or call a technician at 888.38.STORM. Let us prove to you that when it comes to building an impressive and affordable home-quality theater in your vehicle, Sound Storm is your mobile entertainment solution…and everything else is just noise.
Get Price
Top Search
Last Search
