Class D 360 watt amplifier.
Get Price
# Sedona Series 4-Channel Class A/B Car Amplifier
# RMS Power Rating:
* 4 ohms: 55 watts x 4 chan.
* 2 ohms: 80 watts x 4 chan.
* Bridged, 4 ohms: 160 watts x 2 chan.
# PWM MOSFET power supply
# Variable Bass Boost (0, 6, 12 dB at 50 Hz)
# IDI Intelligent Distress Indicator for thermal, short, and impedance protection
# Brushed aluminum finish
# Platinum 4 AWG power block
# Infinitely variable crossovers with multipliers (high/low/band)
# Turn on/off delay
# Tri Mode capable
# High and low inputs
# Variable high-pass filter (50-4000 Hz, 1/2 chan.)(15-500 Hz, 3/4 chan.) @ 12 dB/octave
# Variable low-pass filter (50-4000 Hz, 12 dB/octave)
# Frequency response: 10-39,000 Hz
# Stereo separation: 51dB
# Signal-to-noise ratio: 101dB
# Damping factor: 234
# Total harmonic distortion: 0.03%
# Input sensitivity: 0.2V-6V
# Fuse: 20A x 2
# Dimensions: 13-1/3L x 9-1/2W x 2-1/3H
Get Price
Xstream amplifiers are the results of brightest engineers using the best equipment to get the job done. The Xstream bass amplifiers will produce more bass per watt than any other amplifier in the Soundstream line and possibly the world, while the full-range amplifiers give your highs the bright and accurate sound that you like.
Get Price
BRAND NEW QUANTUM AUDIO 2,800 WATT 4 CHANNEL (BRIDGEABLE TO 3 OR 2 CHANNELS) CAR STEREO AMPLIFIER WITH BUILT IN ADJUSTABLE CROSSOVER NETWORK
Features:
Internal Circuitry: Class AB
4 ohms @ 14.4 volts: 4 x 400 watts / 2 x 1250 watts
2 ohms @ 14.4 volts: 4 x 700 watts
High Efficiency Mosfet Power Outputs
Top of the line Components
Heat Management System
Bandwidth: 20-28 KHz
Capability: 2 ohm stereo
Audiophile grand components
Built in sub-sonic filter
Qsink technology
High efficiency mosfet outputs
On-board precision X-over
Bridgeable
On-board bass boost remote jack
Optional bass remote gain control
THD: .05 %
S/N Ratio: Greater than 95 dB
Input voltage: 11 - 14.4 volts
Adjustable Input sensitivity: .2 MV - 5V
bass boost control @ 45 hz - 12 dB
Weight: 10 lbs
Dimensions: L 18 ? x W 12 ¼ x H 4 ¼
Get Price
Boss PH4.600 Phantom 2400 Watt Mosfet 4-Channel Bridgeable Amplifier with Remote
Get Price
CHAOS WIRED 1600 Watts, 4-Channel MOSFET Power Amplifier, Subwoofer Level Control
Get Price
4 x 125 @ 4-Ohms 4 x 250 @ 2-Ohms 2 x 500 @ 4-Ohms MaxxThe new Ground Pounder GPV Amplifier series for 2009 has everything needed in a reliable performancedriven design from Crunch.Designed by our original Crunch engineers in celebration of 30 proud years the Ground Pounder Amplifier looks great is highlighted by a new heat sink attractive end panels a illuminated scrolling V light.V-Drive PerformanceWeve packed our latest V-Drive performance technologies inside the massive Ground Pounder heat sink. New military grade PCBs large 3 oz. copper traces were added to handle higher current loads. The SPI (Signal Path Isolation) provides clean audio signals to feed the enhanced performance power supply the upgraded circuitry that when combined makes up our new V-Drive technology. A/B Class 4 channel Amplifier Twin-Coil Isolation Design (TCID) Fully Adjustable Crossovers Include: 24 dB Low-Pass 24 dB Subsonic Filter Bass Thrust w/Variable Bass Equalization Crunch Logo w/Blue Halo Illumination Selector Switch Allows Choice of Fixed Illumination or Scrolling Illuminating V RCA Line Outputs Include: Amplifier Daisy-Chaining 4 to 0 Gauge Power Connectors 2-Ohm Stereo 4-Ohm Bridged Stable Twin-Turbo MOSFET Exponential Variable-Power Supply High-Current Power Supplies High-Speed MOSFET Outputs
Get Price
The PowerBass ASA Series of amplifiers offers a complete line up of 2 and 4 channel models. Whether you just need more power or you are looking to build an entire system the ASA Series has a model that is perfect for almost any application. The low profile (under 2-Inch) extruded heatsink lends itself to a wide variety of mounting locations in the vehicle—including under most front seats. Although the elegant brushed satin black finish and rounded corners will have you wanting to show off this sophisticated piece of electronics to all your friends! All of our 2 and 4-channel models include such features as built in electronic crossovers (high or low pass), gain control, variable Bass EQ control, pass through low level RCA jacks and solder-less input terminal blocks. Thanks to our over engineered MOSFET power supplies each model can comfortably operate at 2-ohm stereo or 4-ohm mono. Plus each model comes equipped with a port to add an optional wired remote Gain Controller (order model ASA-BASS) that allows the driver to adjust the woofers output from the cockpit of the vehicle.
Get Price
When power isn’t enough, you need Pyle Super Power. This four-channel, 6000-watt power supply is bridgeable. It’s equipped with everything you’ve come to expect from quality car amplifiers. The RCA ports are silver-plated for eliminating signal loss. A subsonic filter allows low-end interference to be cut, so your speakers will always be delivered the highest quality audio. The MOSFET pulse width modulation power supply allows for a clean, distortion-free signal to your speakers. To keep both your car and the amplifier safe, this model is equipped with thermal, overload, and short circuit protection. So when what you need is power, trust Pyle Super Power.
Get Price
Top Search
Last Search
