The new ZRS Series is unmistakably Cadence. Professional studio grade quality means your system will deliver dynamic sound with natural transparency, unmatched impact, and perfect imaging. The ZRS C5 is a class D mono block amplifier. It has a high speed MOSFET power supply and bipolar Japanese Sanken outputs. The ZRS C5 has copper rail PCB architecture. There is a preamp input voltage of 200mV-9V, and has a 12-24dB crossover circuitry. It has a bass focus with rumble control, preamp RCA outputs, and adjustable subsonic filters and phase control. There is a soft start mute and delay circuitry and power and diagnostic LED indicators. The ZRS C amplifiers are master/ slave configurable and are twin amp bridgeable for twice the power output. Each comes with a dashboard bass remote control. The ZRS C5 has a power handling of 1250 Watts at 4 ohm RMS, 2500 Watts at 2 ohm RMS, 5000 Watts at 1 ohm RMS, with a 10,000 Watt Peak. The frequency response is 10Hz – 500Hz. It has a minimum harmonic distortion of 100dB, and a damping factor of >100 @ 100Hz. The power supply is 18V capable. The ZRS C5 dimensions are 23-inch (L) x 11.6-inch (W) x 2.7-inch (H). Product comes with a two (2) year repair/replace warranty, which covers factory defects. Should the product fail during the warranty period, simply call 800-477-2328 for a Return Authorization Number.
Get Price
Optimized acoustic resonances for complex impedances of the ear Proprietary tangle free flat cable design Tuned using occluded ear simulator IEC711 (reproduces inner ear canal) Ultra accurate mid-range and high frequency characteristics
Get Price
This class-bd mono low-frequency amplifier pumps out 2,500 watts. It can easily drive four 2-ohm DVC woofers without breaking a sweat or any array of woofers wired to create a 1-ohm amplifier load. Use two amps in Power-Sync mode for a whopping 5,000 watt power horse! 0* 0/180 Phase Switch * 1/0 AWG power/ground connectors * 24dB/octave crossover * Audiophile grade speaker connections * Blue L.E.D. Stealth Signal/Power Meters - monitors signal & voltage with simulated VU needle * Infrasonic filter * MasterSync - allows 1 amplifier to control an array of amplifiers * MOSFET output stage * MOSFET power supply * PowerSync - allows 2 amplifiers to be "strapped" together * RCA pass-thru Optimized acoustic resonances for complex impedances of the ear Proprietary tangle free flat cable design Tuned using occluded ear simulator IEC711 (reproduces inner ear canal) Ultra accurate mid-range and high frequency characteristics
Get Price
RCA stereo outputs allow for even more audio hookup. Video output allows you to pass video from your iPod to a TV The dock works all iPod models, including the iPod touch and any featuring a click wheel; it is also Works with iPhone certified Convenient carry handle maximizes portability Speaker Design - 2-way Woofer - 5 Tweeter - 3/4 Tweeter Design - silk dome Passive Radiator - 6 x 6 RMX Power (watts) 2x20 Effective Frequency Range (Hz) 50-20k Power Supply (volts, ampere) 22, 2.7 Unit Dimensions - 8.5 H x 19.2 W x 8.4 D; Weight - 9.2 lbs.
Get Price
Description: JL Audio HD900/5 HD Series 5-Channel Class D Car Amplifier RMS Power Rating: 4 ohms: 100 watts x 4 chan. + 500 watts x 1 Chan. 2 ohms: 75 watts x 4 chan. Total continuous Power Rating: 900 watts Single Cycle Control delivers reference-grade performance while requiring less current from the vehicle's electrical system R.I.P.S (Regulated, Intelligent Power Supply) ensures consistent power delivery over a wide range of battery voltage and load impedances Regulated means that the power supply adjusts its operation to maintain the rated power output and low distortion operation over range of vehicle voltages Intelligent power supply is a circuit that monitors output current to perfect the amps output power over a range of load impedances. It detects the actual impedance and adjusts rail voltages for the best output Variable bass boost up to +15dB LED power indicators Variable front crossover: 50 - 500Hz, selectable slope 12dB/octave Variable rear crossover: 50 - 500Hz, selectable slope 12dB/octave Differential-balanced inputs to effectively control noise and will allow you to connect most OEM units straight to the amplifier Three sets of RCA Jack input, front, rear and subwoofer with a dedicated input sensitivity gain control for the channels RealSink heat management with rollback protection removes heat from the amplifiers circuitry while the vertical heat Infrasonic filter: Defeatable 24dB/octave at 30 Hz Subsonic Filter (24 dB at 30 Hz) CEA-2006 compliant amplifier Frequency response: 12 - 28,000Hz Optional wired remote level control Dimensions: 10-13/16"D x 8-7/8"W x 2H 4-gauge power and ground wiring is required for installation. Contact us for information regarding a discount on select amplifier kits when purchased together with this amplifier.
Get Price
JL Audio HD750/1 Monoblock Class D, HD Series Small Profile Car Amplifier with R.I.P.S. Technology JL Audio HD Series Monoblock Class D, Small Profile Car Amplifier with R.I.P.S. Technology RMS Power Rating: 1.5-4 ohms: 750 watts x 1 chan. Max power output: 750 watts x 1 chan. MOSFET power supply Remote bass level input (HD-RLC required and sold separately) LED power indicators Single channel operation Preamp RCA outputs Single Cycle Control™ Heavy duty aluminum alloy heatsink for heat dissipation RCA level inputs Screw terminals Variable high-pass filter (50-500 Hz, 24 dB/octave) Variable low-pass filter (50-500 Hz, 24 dB/octave) Frequency response: 6-30,000 Hz Dimensions: 10-13/16"L x 8-1/4"W x 1-15/16"H
Get Price
Top Search
Last Search