Brand New, unopened in Original Packaging. Ships Same Day, Full 1 year Warranty.
Get Price
The new ZRS Series is unmistakably Cadence. Professional studio grade quality means your system will deliver dynamic sound with natural transparency, unmatched impact, and perfect imaging. The ZRS C6 is a class D mono block amplifier. It has a high speed MOSFET power supply and bipolar Japanese Sanken outputs. The ZRS C6 has copper rail PCB architecture. There is a preamp input voltage of 200mV-9V, and has a 12-24dB crossover circuitry. It has a bass focus with rumble control, preamp RCA outputs, and adjustable subsonic filters and phase control. There is a soft start mute and delay circuitry and power and diagnostic LED indicators. The ZRS C amplifiers are master/ slave configurable and are twin amp bridgeable for twice the power output. Each comes with a dashboard bass remote control. The ZRS C6 has a power handling of 1500 Watts at 4 ohm RMS, 3000 Watts at 2 ohm RMS, 6000 Watts at 1 ohm RMS, with a 12,000 Watt Peak. The frequency response is 10Hz – 500Hz. It has a minimum harmonic distortion of 100dB, and a damping factor of >100 @ 100Hz. The power supply is 18V capable. The ZRS C6 dimensions are 26-inch (L) x 11.6-inch (W) x 2.7-inch (H). Product comes with a two (2) year repair/replace warranty, which covers factory defects. Should the product fail during the warranty period, simply call 800-477-2328 for a Return Authorization Number.
Get Price
Optimized acoustic resonances for complex impedances of the ear Proprietary tangle free flat cable design Tuned using occluded ear simulator IEC711 (reproduces inner ear canal) Ultra accurate mid-range and high frequency characteristics
Get Price
This class-bd mono low-frequency amplifier pumps out 2,500 watts. It can easily drive four 2-ohm DVC woofers without breaking a sweat or any array of woofers wired to create a 1-ohm amplifier load. Use two amps in Power-Sync mode for a whopping 5,000 watt power horse! 0* 0/180 Phase Switch * 1/0 AWG power/ground connectors * 24dB/octave crossover * Audiophile grade speaker connections * Blue L.E.D. Stealth Signal/Power Meters - monitors signal & voltage with simulated VU needle * Infrasonic filter * MasterSync - allows 1 amplifier to control an array of amplifiers * MOSFET output stage * MOSFET power supply * PowerSync - allows 2 amplifiers to be "strapped" together * RCA pass-thru Optimized acoustic resonances for complex impedances of the ear Proprietary tangle free flat cable design Tuned using occluded ear simulator IEC711 (reproduces inner ear canal) Ultra accurate mid-range and high frequency characteristics
Get Price
Rockford Fosgate 1000 Watt Mono amplifer with on-board adjustable crossover, gain control, and Patented Punch EQ. Amplifier features DTM Thermal management circuitry and MOSFET technology for clean performance that does not shut down. CEA Certified RMS Power Rating 250 watts x1 @ 4 Ohms, 500 watts x1 @ 2 Ohms, 1000 watts x1 @ 1 Ohms. Visit www.RockfordFosgate.com 24 hours a day for technical support or call (800)669-9899 M-F 7 am to 5 pm MST.
Get Price
Class D Monoblock Subwoofer Amplifier *
High-Damping Class D Circuit with discrete control circuitry *
Differential-Balanced Input Topology: 1 pair of inputs *
On-board Crossover: Fully-variable (40 - 200 Hz), selectable-slope (12 or 24 dB per octave) LP *
Bass EQ: Single-band parametric with variable boost up to +15dB and Remote Bass Option *
Preamp Output: 2-channel (independent active filter, parallel with amplifier filter or pass through) *
Output Polarity Reversal: Switch permits instant output polarity reversal *
Infrasonic Filter: Fully-variable 24dB/octave from 15-60 Hz *
Dual mono speaker output connections: Accept up to 8 AWG wire *
+12V and Ground connections: Accept 4 AWG wire (required) *
Rated Power: 1000 W RMS @ 1.5 ohm - 4 ohm (11V-14.5V) *
THD at Rated Power: 95dB below rated power (A-weighted, 20 Hz - 20 kHz noise bandwidth) *
Frequency Response: 5 Hz - 200 Hz (+0, -1dB) *
Damping Factor: >500 @ 4 ohm / 50 Hz *
Input Range: Switchable from 200mV-2V RMS to 800mV-8V RMS *
Dimensions (L x W x H): 19.70 x 9.25 x 2.36 in; 500 x 235 x 60 mm
Get Price
AudioControl designed the DQXS to make your car audio system sound better. This 6-channel equalizer features 130 bands of adjustment, along with two parametric EQs per channel and an 8-channel crossover, for some serious sonic fine tuning. Plus, you can store your favorite system settings in eight different memory locations that won't go down when you lose power.
Easy to setup, easy to use
The DQXS features 6-channel inputs and 8-channel outputs, fitting between your receiver and your amplifiers in the signal chain. Once connected, the DQXS makes it easy - turn up the input gain knobs until the "Maximized" indicator flickers, adjust the output knobs until you reach the desired output, and you're all set. You can adjust the output level up to 7.5 volts, so you can maximize the performance of any amplifier.
Get Price
AudioControl's DQL-8 processor allows you to add aftermarket amps, speakers, and subs to your factory radio, and to tune your new system for maximum sound quality. It accepts speaker-level signals from your factory radio or amplifier, so you can use it with any system. And the DQL-8's auxiliary input allows you to connect an iPod, satellite radio, or other portable player to your setup.
Inputs and outputs
The DQL-8 features eight speaker-level inputs that let you connect amplified signals, including multi-wire cables from Bose and other premium factory systems rated up to 400 watts. Six high-quality RCA preamp outputs send a strong signal to your amps. Add an iPod, satellite radio, or other source to the RCA auxiliary input for even greater flexibility.
Get Price
Marketing description is not available.
Get Price
Top Search
Last Search
