Alpine MRP-F300 - Amplifier - V-Power - 4-channel
Power up your system with Alpine MRP-F300! This best selling amplifier offers more choices for building the right system for you, and provides flexibility and value in an aggressive design. Alpine continues to bring you mind-blowing sound performance - only the best - so you get the sound you deserve.
Alpine MRP-F300 - Amplifier - V-Power - 4-channel Features
- Brigded 4 Ohms: 150W X 2
- RMS Power Per Channel Into 2 Ohms: 75W X 4
- RMS Power Per Channel Into 4 Ohms: 50W X 4 (1% THD)
User Reviews about Alpine MRP-F300 - Amplifier - V-Power - 4-channel
I purchased this amplifier to power a set of Alpine 6 X 9 (SPS 609's) speakers. My original plan was to have this amp power a sub-woofer along with the 6 X 9's. After making my connections to my head unit, speakers, and power supply, I discovered that a sub-woofer was really unnecessary for the type of sound I was trying to achieve. I was not interested in earth-shaking bass, but rather deep, rich bass to compliment the highs. The amp helped my full-range speakers perform exactly in the way they were designed to perform...excellent!!! -- SERIOUS PUNCH
Installed some Infinity mids in all 4 doors with tweeters and this amp pushes them quite well. I don't have a sub yet so I turn the bass boost on and the speakers really come alive. Great construction only wish the space for the power wire and ground wire were larger so I can use the 4 gauge wire I have but instead I had to use some 8 gauge wire but I'm sure it's fine. All in all a great amp and no heat problems at all even in a cargo tray in my trunk covered with the stock carpet. -- Perfect
This device really suprised me about sound quality.
The installation was very easy and the setup was simple - the amp gain was fixed in a half of maximum power and the final result was great. -- Really great sound quality
I bought this Amp on a budget and just wanted to power a sub and my back speakers because the stock Honda nav system has low voltage to the rear speakers so it's all front and no bass, Etc. SO I hooked this thing up to my old Pioneer Subwoofer box thing (Like $200 in the day/ 12 years ago or more) and hooked it up to my POLK 6 1/2 component speakers in the rear deck (And they have cross over boxes) WOW!!!!!! I had to turn the gain to 52% on the sub and 25% on POLK spkrs. This thing bumps but keep in mind it is not a 500 WATT AMP so I am not shaking peoples houses either!. Distortion is low (I hear NO Hiss) I am using the Sub Eq switch and have the cross-over turned all the way down on sub. it sounds killer! I am completely satisfied but have now built a new (Sealed) box with a R Fozgate Sub and need more power!! I am looking at a higher voltage Alpine.
***My Gripe.. I ran 4 AWG power wire and the terminal ends on the amp are small and you have to trim the GRND/PWR wire to 8AWG to use the terminal ends that I bought at FRY's for $1.99 and Heat shrink too. I tried to find a 4AWG reducer type terminal end with NO LUCK! but it works great and looks good!! -- Alpine still has it!!
This product is very easy to install. It's like plug an play. Nothing more to say. Operation und sound is excellent -- Top product